With a BS in Chemical Engineering (Hons) from HOWARD UNIVERSITY – Washington D.C., she worked till recently as the MD, FSS Gases Ltd to successfully specify, design, and distribute ALL fire suppression systems offered by Tyco Safety products in the West African market. She is well trained in the engineering of integrated fire safety systems by Tyco.
Prior to that, she was a consultant in HSE with particular emphasis in PROCESS, MANUFACTURING and ENVIRONMENTAL SAFETY in several countries.

While in the US, Antonia worked as a process engineer for MERCK SHARP & DOHM and MONSANTO CHEMICAL garnering skills in regulatory compliance, GMP and Root Cause Analysis.

She is a member of the American Society of Chemical Engineers and American Society of Black Engineers.
She contributes tremendously in the following areas:

• Identification and Development of OEM representation ensuring continuous upgrade of technology, products and services.
• Project management and engineering guidance on the design and supply of all safety systems.
• HAZOP, HAZID, CONSEQUENCE & RISK ANALYSIS
• Safety Audits
• Development of operational policies/procedures in line with GMP.
• Supervises implementation of a good HSE policy.

Holds a B.Sc (Hons) in chemical engineer with proven Project management and Oilfield services of 8+ years experience most especially in HSE services. As our risk management analyst, he works with the licensed software PHA Pro 7 and Audit Works to comprehensively incorporate all safety concerns in projects from conception thru commissioning and maintenance by:

• Contributing constructively to studies required to select appropriate technologies, equipment, services and engineering designs.
• Using vast experience to monitor of the execution of the construction phase of a project covering Quality control and HSE management towards achieving contract costs and schedule targets.
• Using abilities to develop and document project development objectives, establish and maintain project schedules to drive and report progress, including giant charts, resourcing plan and 90 days look heads. Also proficient in using Drillprov 5 (A horizontal well planning and construction software) and  Primavera Project Planner

Michael holds a Mechanical Engineering Degree from the University of Maiduguri and is trained in the design of Automated Fire Safety Systems by Tyco Safety Systems, Fire and Security Techniques, SA and Control Equipment, CA.  His certification for upstream design using the licensed software HYSIS along with experience in the maintenance of hydraulic systems makes him competent and valuable in the following areas.

• Design and specification of fire safety systems using OEM software based on recommendations from risk & consequence analysis.
• Hydraulic / Mechanical Part specification
• Quality control of MOC used in hydraulic and Mechanical aspects of all projects
• Sub-contractor site supervision.
• Technical Liaison with client on all fire systems.
• Project  management

Peter is has a degree in Mechanical Engineering from LAGOS STATE UNIVERSITY and is well trained in the design of Tyco Fire Safety Systems. His mastery of AutoCAD is a great asset to SCSP for he is responsible for installed system conformity check against design and the production of “as built” drawing for submission at commissioning. As a young graduate, he handles the following:

• Site Inspections and measurement of parameters for design
• System design using OEM software
• Quotation of automated suppression systems
• Project / site meetings
• Project reports
• Development of AutoCAD drawings

A graduate of the University of Lagos, he has worked in HSE services (particularly in Fire Prevention Safety) from 1984 till date. He is extremely versatile and knowledgeable and also a resource person for installed systems training and consultancy.

Prior to joining SCSP and the sub-contractor supervisor and INSTALLATION QUALITY ASSURANCE MANAGER, he worked with Safety and Technical Services and has handled over 1000 installation of fire safety systems in different sectors including ICT, Oils & Gas, Manufacturing Plants and Aviation. In the Aviation sector where safety is paramount, reputable companies like DHL are currently using his services privately for installation, maintenance (including air craft and run way), and training.

He has to his credit over a hundred and fifty published articles on safety, Fire prevention techniques and Security.  His role as Installed System Quality Assurance Manger includes:

• Site supervision of sub-contractors work
• Proper work schedule for all site
• After commissioning training
• Maintenance plan development
• Maintenance history reports (where maintenance contracts signed)

A product of Yaba College of Technology, he has the following qualifications in EE

• OND Electrical Engineering / HND in Electrical & Electronics
• C&G course ‘B’ London (Electrical Installation)
• BOEING 737: Aviation Electrical and Instrumentation coverage

He has eighteen years working experience in installation works-Domestic and Industrial, Fire detection and alarm systems and communication equipment. His core area is in the supervision of design, installation, testing, maintenance, repairs and appraisals of the electrical aspects of safety systems.

With a B.Sc. in Electrical Engineering from Technion Institute of Technology; Haifa, Israel. He is currently in NLNG Bonny as the Electrical Engineer Maintenance Supervisors. He adds tremendous value when needed especially with low voltage systems.

While head of EE for Etco, Joseph has worked extensively with the electrical aspect of FIRE DETECTION, ALARM and SUPPRESSION SYSTEMS.In Israel he gained experience while working as the Chief Engineer, Commandant of an electrical design and support department.

He is a member of the Isreali Engineers Association. With such an incredible background, Joseph adds value on all electrical in the following areas as:

• Technical guide and support for electrical Designs.
• Technical supporting for failure analysis, repairs and maintenance of HIGH and LOW voltage systems, ensuring reliable electrical and control system; including: Generators, UPS machines and Distribution systems and busses, cables and panels.
• Maintenance and servicing training of in-house staff for low voltage systems

Emmanuel holds a post graduate diploma in Management and Bs in Biochemistry. His strength lies in experienced gather from management of Key client accounts for pharmaceutical companies to ensure smooth delivery of vital medical products to large establishments like LUTH.

This parallel ability to handle successful delivery of products and service in a time conscious sector critical to life and death makes him ideal in ensuring the objectives of our key clients are timely effectively met.

• Understanding of  SPECIFIC client needs
• Ensuring timely and cost effective delivery of services
• Inter-facing between clients and technical department to monitor and ensure seamless project management and completion.
• Key client project  management

S. Hassan ; CLIENT CARE MANAGER 

He is the President of National Industrial Safety Council and has served as International labour Organization's expert on Occupational Health and Safety. Also, he has participated in discussions on National Policy on Occupational Health and Safety for the Federal Ministry of Health and Federal Ministry of Labour and Productivity.

He was a Medical Director at Nigerite Limited and Medical Consultant, Nigerian asbestos Association (Now Nigeria Association of Mineral Fibres-Cement Products)